2–Channel 4K HDR HDMI over Extended Reach HDBaseT Output Card with Analog Audio

Model: DTAxrD2-OUT2-F34

Max. Data Rate - 18Gbps (6Gbps per graphics channel), 10Gbps DSC over CAT cable
Max. Resolution - 4K at 60Hz (4:4:4)
Analog Audio Embedding/De–embedding or ARC - On the same jack
HDBaseT Technology - HDTV compatible, HDCP 2.2/1.4 compliant
System Range - Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

DTAxrD2-OUT2-F34 is a two-channel, 4K at 60Hz (4:4:4), DSC, HDMI, analog audio, bidirectional RS-232, Ethernet and IR over HDBaseT twisted pair transmitter card for compatible Kramer Modular Multi-Format Digital Matrix Switchers. DTAxrD2-OUT2-F34 outputs two extended-reach HDBaseT signals with selectable embedded/de-embedded analog audio, bidirectional RS-232, IR, and Ethernet from the chassis to the line

Max. Data Rate - 18Gbps (6Gbps per graphics channel), 10Gbps DSC over CAT cable
Max. Resolution - 4K at 60Hz (4:4:4)
Analog Audio Embedding/De–embedding or ARC - On the same jack
HDBaseT Technology - HDTV compatible, HDCP 2.2/1.4 compliant
System Range - Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to
180m (590ft) ultra mode (1080p at 60Hz at 24bpp). Note: When using Kramer HDBaseT cables
Ethernet Extension - Ethernet interface data flows in both directions, allowing extension of up to
100Mbps Ethernet connectivity for LAN communication and device control
Bidirectional RS–232 Extension: - Serial interface data flows in both directions, allowing data
transmission and device control
Bidirectional Infrared Extension: - IR interface data flows in both directions, allowing remote control
of peripheral devices located at either end of the extended line
3D Pass–Through

Depth: 9.80 in
Height: 0.79 in
Width: 5.08 in
Ports: 2 Unbalanced Audio: On a 6–pin terminal block connector, 2 RS-232: On a 6–pin terminal block connector, 2 IR: On a 4–pin terminal block, 1 Ethernet: On an RJ–45 connector
Inputs: 2 HDBaseT: On RJ–45 connectors
Product Weight: 0.40 lbs
Active Power: 21.50 Watt
Certifications: CE, WEEE
Shipping Width (with packaging): 6.50 in
Shipping Height (with packaging): 2.32 in
Shipping Depth (with packaging): 13.58 in
Extended RS-232: Baud Rate: 300 to 115200
Extended Ethernet: Bandwidth: Up to 100Mbps

ROHS Compliant - Yes

HDBaseT Output Card 111832 kb - Data Sheet

Project List

Request Quote

3D Audio Visual Communications, Inc
8820 Michaux Lane
Richmond, VA 23229
USA
(804) 750-2250
www.3d-av.com

Contact in regards to this product:

Kramer Electronics USA, Inc.

Model: DTAxrD2-OUT2-F34

USA Inquiries Only

AV-iQ Terms and Conditions | | Powered by AV-iQ